POE

POE SUPPLY

INPUT:
AC Input Voltage Range					EMC
90 to 264VAC					FCC Part 15 Class B
AC Input Voltage Rating					EN55022 Class B
100 to 240VAC					Isolation Test
AC Input Current					Primary to Secondary: 3000VAC for 1 minute 10mA
0.15A(RMS) max. for 90VAC					Primary to F.G.: 1500VAC for 1 minute
0.05A(RMS) max. for 240VAC					Output to F.G.: 1500VAC
Leakage Current					Immunity EN50082-1
0.25mA max. @ 254VAC 60Hz					ESD: EN61000-4-2. Level 3
AC Input Frequency					RS: EN61000-4-3. Level 2
47-63Hz					EFT: EN61000-4-4. Level 2
AC Inrush Current					Surge: EN61000-4-5. Level 3
15A(RMS) max. for 115VAC					CS: EN61000-4-6. Level 2
20A(RMS) max. for 230VAC					Voltage Dips EN61000-4-11
OUTPUT:					Harmonic: EN61000-3-2
Total Output Power					Insulation Resistance
12W					Primary to secondary: >10M OHM 500VDC
Efficiency					Primary to FC: >10M OHM 500VDC
80% (typical) at Max. load, and 120VAC 60Hz					FEATURE:
Hold-up Time					Over Voltage/Current, Short Circuit Protection
16mS min. 120VAC and max. load					The output can be shorted permanently without damage
Transient O/P Voltage Protection					Indicators
60V max. at switch on and off at any AC line Phase					Led #1 Indicator for fault-RED
ENVIRONMENTAL:					Led #3 Indicator that Detected and Connected
Temperature					to valid  IEEE802.3af load-GREEN
Operation 0 to +40°C					Input Connector
Non-operation -25 to +65°C					IEC320 inlet 3 pin
Humidity
Operation 5 to 90%

POE